Multibeam 2 Martin Rush

Multibeam 2 Martin Rush

Powerful and intense multi-beam effect

Two moveable bars with narrow long-throw beams

10 individually controllable 10 W RGBW LEDs

Electronic dimming and variable strobe

Master / slave function

Preprogrammed macros

DMX or sound activated

3 & 5 pin XLR

PhysicalLength:473 mm
Width:248 mm
Height:164 mm
Weight:9.5 kg

Dynamic EffectsColor mixing:RGBW
Color selection:32 color presets
Electronic ''shutter'' effect:Strobe effect, pulse effects, instant open and blackout
Pre-programmed effects:12 pre-programmed macros with adjustable speed
Electronic dimming:0 - 100%

Control and ProgrammingControl options:DMX, stand-alone, master/slave
DMX channels:44
Stand-alone trigger options:Music trig, auto trig
Setting and addressing:Control panel with LCD display
Protocol:USITT DMX512/1990

OpticsLight source:10 x 10 W RGBW Cree XM-L LEDs
Minimum LED lifetime:50 000 hours (to >70% luminous output)*
Beam angle:8°
*Figure obtained under manufacturer´s test conditions

ConstructionColor:Black
Housing:High-impact flame-retardant thermoplastic
Protection rating:IP20

InstallationMounting points:Two quarter-turn brackets for rigging clamps
Location:Indoor use only, must be fastened to surface or structure
Orientation:Any

ConnectionsAC power in/thru:Neutrik PowerCon
DMX data in/out:3-pin and 5-pin locking XLR

ElectricalAC power:100-240 V nominal, 50/60 Hz
Typical total power consumption:130 W
Power consumption figures are typical, not maximum. Allow for +/-10% variation.

ThermalCooling:Forced air (temperature-regulated, low noise)
Maximum ambient temperature (Ta max.):40° C
Minimum ambient temperature (Ta min.):0° C
Total heat dissipation (calculated, +/- 10%, at full intensity, full white):450 BTU/hr.